How To Fix a Loose Charger Cord

It can totally ruin your day when your phone is still uncharged even after being plugged the entire night. This can happen due to a loose charger cord. If this is the case, you will notice that there is no clicking sound when you attach the charger cord with the phone’s charging port. But you can learn how to fix a loose charger cord and avoid buying a new one.

The phone may initially start to charge when you plug the charger, but even a slight movement of the cable will cause the charging to stop.

People often end up with broken screens when a loose charger cord causes the device to fall onto the floor while charging. It’s definitely something you don’t want to risk. It just takes a few minutes to tighten your charger cord and get it working again. What are the steps to do that?

Tools That You Will Need

  • Something with a thin pointed end(a knife or a needle)
  • The broken cable that you want to fix

Yeah, that’s all you will need to fix the issue. But this method will only work if the silver connector portion is still intact with the plastic housing. If the connector completely comes out, it’s best to buy another cable from the market.

How To Fix a Loose Charger Cord

Why Is the Cable Not Locking in With the Port

The reason why your charger cord is loose is that the small pins on the cable are not doing their job properly. Prolonged use of the charger cord will eventually displace the pins causing the connection to be loose.

The DIY solution to fix a loose charger cord

First, you need to spot the tiny little prongs on one side of the connector, at the front of the cord. You will notice that these barely protrude in a worn-out cable. These are the parts that should get inside the two holes found in the charging port and lock themselves in place

To begin fixing the issue, first, make sure that the cable is unplugged. Now take a really slim screwdriver or a knife, and try to pry the front-end of these prongs back out. What you are aiming for is these to pop out. Get your knife, needle, or screwdriver under the hook and lift it up.

If you are doing it right, you will notice that this will expose the front tip of the prongs. These will now protrude higher and therefore will lock in with the holes when you plug the cord into the charging port. If you are using a screwdriver, just place it under the hook and rotate it to pry it out.

How To Fix a Loose Charger Port

What is the problem is with the charging port on your phone or laptop instead of the cord? This will be a little more complicated than learning how to fix a loose charger cord. Nonetheless, this is doable if you try the following steps.

Due to repetitive plugging and unplugging of the charger, the connector under the charger port may loosen up. Let’s see how to fix a loose charger port at home. You will need the following tools to perform this fix:

  • 8 T5 Screw Driver
  • A pry tool
  • Pliers

Steps

  1. You have two screws next to the charging port. Use the screwdriver to undo them.
  2. Now remove the sim.
  3. Use a pry tool to remove the back cover.
  4. Remove the battery connector.
  5. Remove the speaker and the vibrator module.
  6. Take out the module that has an audio jack and the charging port on it.
  7. Use pliers tool to apply some pressure to the port until it’s tight.
  8. Now put everything back and test if the phone is charging.

Quick Fix for Loose Charger Port on Android and iPhone

Quick Fix for Loose Charger Port on Android and iPhone

If you don’t have the patience or the time to try the above method, you can simply use electric tape, cut a small strip, slowly place it inside the charger port and let it fold at the edge. Now when you place the charger cable inside the port, the connection won’t be loose and the charging would not be interrupted by any movement.

So, if you want to quickly learn how to fix a loose charger cord for an iPhone or an Android device, this should be good enough for you. But first, make sure that you don’t have a loose charger cord that’s causing the issue.

Conclusion

There is always the option of buying new parts to repair your charging cord or the port. But, all you need is just a few tools to do it at home. You can save your money as well as instantly fix the issue without waiting for the new parts to be delivered.

If you believe in doing it yourself, you can learn how to fix a loose charger cord by following the easy steps that we have shared. If it doesn’t work, you can always buy replacements and get the issue resolved. But why not take the time to try it yourself first?

Leave a Reply